XT FLEX12 1500/22 - 3000

STRUCTURE C - MONOBLOCK

The “Meehanite” cast-iron “monoblock” structure has better cushioning, less distortion, and a lower breaking rate than any other competitor.

FLEXIBILITY OF TOOLS BEYOND CONVENTIONAL

Choose the necessary configuration: from monopunzón (To, B, C or D until Ø 88.9 mm.) To the Multitool. Why talk about number of stations? What you need is flexibility, speed and ease of assembly with the right tools for your job. Euromac offers you this flexibility. We talk about number of tools.

• The innovative MTX 6 has an automatic turret of up to 60 tools (patent pending)

• More flexibility: each of the D stations can be mounted with a single-punch type (A-B-C-D) or with a multitool of 4-6-10 stations (Patent I 0.875.310)

• The innovative EUROMAC Autoindex system, allows the MTX to rotate 360 ° to 3 single-punch type "D" and Multitools of 4, 6 and 10 stations (bidirectional).

By installing three Multitools of 10 tools it is possible to obtain up to 30 indexed tools, allowing you to rotate each of them up to 360 ° (patent pending).


FLEX HYBRID SYSTEM

Which is better electric or hydraulic? Why not get the best of both systems? Our hybrid system, unique in the market that we call Flex (2 patents pending) has the power of hydraulics combined with the precision of electronic control. A low consumption of only 8.5 kw with an average of 4.5 kw while pressing. In addition to being able to adjust the upper and lower stroke length, the Flex system allows you to configure for each tool:

- From 10-2000 strokes / minutes

- Speed of movement of the piston

- Waiting time under pressure

Thanks to the Flex system any Euromac owner controlled without limits deformation operations, as well as the tools to process any application quickly, efficiently, reliably and cost-effectively.

• The "Standby Mode" function during downtime further reduces power consumption

• The Flex system allows the operator to control any special function such as continuous training, engraving, bending, marking or threading. In addition, thanks to the interpolation of the axes, it allows us to use the technology of pulley-type tools for chiseling, smoothing, "offset", deburring. Giving more possibilities and quality of finish to your product.

• The control of the speed and the acceleration also help us to improve the quality of punching when it works with fine materials, thick or of big hardness, (thanks to the precision of positioning of 0,05 mm)


INNOVATIVE SELF-INDEX SYSTEM

The direct transmission of the accionamiento of rotation in the stations Autoindex Euromac, reduces the mechanical components and increases the rigidity, giving a greater reliability, increase of the productivity as well as the reduction of the costs and the maintenance (patented)


TOOLS

3 360º AUTOINDEX "D" stations (in 0.01º increments), with capacity for:

- 1 Monopunzón, station A, B, C or D (not included)

- 6 tools Autoindex up to Ø 24 mm in XMTE6 (not included)

- 4 Autoindex tools up to Ø 31.7 mm in XMTE4 (not included)

- 10 Autoindex tools up to 8 Ø 12.7 mm and 2 of 24 Ø mm in the XMTE10 (not included)

Max. punching force (kN)
250
Y axis with Multitool / Single punch (mm)

Y = 1500 1550 / 1500
X axis (mm)
3050 / 3000
Automatic replacement in X (mm)
fins a 10000
CNC stroke depth (mm)
desde 0.1 a 31
Hydraulic servomotor controlled system standard
Hydraulic servomotor controlled system
+/- 0.05
Accuracy in the repetitiveness of drawing (mm)
+/- 0.1
Bidirectional Autoindex Stations
3
Clamp opening (mm)
11
Automatic Tweezers
3
Max. strokes (1 / min): Punching with 20mm pitch
460
Nibbling with 1mm pitch
1100
Marked
2000
Thickness range (mm)
0.6 - 6
Max. sheet weight at reduced shaft speed (kg)
180*
USB 6
Installed power (kW)
8.5
Average consumption (kW / h)
4.5
Approximate weight (kg)

X= 3000 9800
Total dimensions (mm)

X = 3000 6200 x 4604


* For sheets over 50 kg it is recommended to use a combined table of brushes and balls

Multitool FMTE10


Our 10-tool Multitool has the same properties of a fully guided single-punch as the Wilson 90 series or the Mate Ultra series thanks to the following specifications:


• 8- tools up to 12.7 mm (Type A)

• 2- tools up to 24 mm (Type FMTE6)

• 100 mm punch length

• Adjustable punches, up to 7 mm grinding life.

• Fully guided punches

• Keyway punches for improved accuracy

• Unlimited capacity in gnawing

• Quick punch change

• Up to 22 tons - Maximum thickness of 6mm

• Adjustable extraction force adjustable depending of material and thickness


Multitool FMTE6


Our 6-tool Multitool has the same properties of a fully guided single-punch as the Wilson 90 series or the Mate Ultra series thanks to the following specifications:


• 6- tools up to 24 mm (Type FMTE6)

• 100 mm punch length

• Adjustable punches, up to 7 mm grinding life.

• Fully guided punches

• Keyway punches for improved accuracy

• Unlimited capacity in gnawing

• Quick punch change

• Up to 22 tons - Maximum thickness of 6mm

• Adjustable extraction force adjustable depending on material and thickness


Multitool FMTE4


Our 4-tool Multitool has the same properties of a fully guided single-punch as the Wilson 90 series or the Mate Ultra series thanks to the following specifications:


• 4- tools up to 31.7 mm (Type B)

• Fully guided punches

• Compatible with type B stations

• Keyway punches for improved accuracy

• Unlimited capacity in gnawing

• Quick punch change

• 100 mm punch length

• Adjustable punches, up to 9 mm grinding life.

• Up to 22 tons - Maximum thickness of 10mm

• With a special punch up to 12.7 mm thick

• Adjustable extraction force adjustable depending on material and thickness

mas_info

I WANT TO RECEIVE MORE INFORMATION