Say goodbye to sharp edges! This 600 mm wide deburring, edge rounding and finishing machine has 3 workstations: a grinding belt as the first station followed by two stations with 4 oscillating brushes in total. With this machine you can execute various finish methods including deburring, grinding, edge breaking, edge rounding, removing the oxide layer or heavy slag and linishing. The F600 is suitable for processing products up to 600 mm wide. In short, the perfect machine for finishing (non-)ferrous laser cut parts.

The F600 is a deburring machine suitable for finishing sheet metal products e.g. laser cut parts with a width up to 600 mm. You determine the finish and degree of edge rounding. Depending on the materials to be finished you select a vacuum or magnet system. The conveyor belt is adjusted according to your choice of system. The first station of the F600 consists of an abrasive head. The abrasive belt removes the burrs and incinerations marks from the product surface. You can determine the grain size of the abrasive belt yourself, depending on the height and hardness of the burr. Standard we supply a K120 abrasive belt with the machine. If you do not have any burrs you can leave the abrasive belt switched off. The second and third station is the so-called brush unit, equipped with 4 cross-rotating brushes. You can break the sharp edges of the product with this and provide them with a large radius.

You can also change the surface finish (e.g. more gloss / lower roughness value) by changing the type and grit of the brushes. By placing special steel brushes, you can remove oxide layer or do slag removal on steel product with the F600-MAG (with magnet system).

The F600 allows you to process your cut parts at high speed and do multiple finish operations in one pass.

Suitable for processing:

• Stainless steel

• Aluminum

• Steel


  • 5x faster than comparable machines
  • Line grain finishing possible
  • Easiest control in the market
  • Combination of applications in one pass
  • Large edge rounding possible
  • A deburring machine for finishing plate parts with a width up to 600 mm
  • Powerful vacuum system (non-ferrous) or magnet system (ferrous)
  • Combination of operations in one pass
  • Compact, stable and safe machine
  • Large edge rounding possible
  • Freely adjustable speed of: convey belt, brush unit and grinding unit
  • Constant quality, easily reproducible
  • You determine the finish and degree of rounding
  • Stable grinding pattern possible
  • Unique oscillation system ensures for a stable grinding belt
  • Standard equipped with 1 grinding belt with 4 brushes
  • Brush head oscillates across the width of the machine
  • Fast switching time
  • Unique brush height tracking system
  • Easy adjustable brushes for brush wear compensation
  • Safe and convenient to use
  • Clear work process, everything is clearly visible
  • Suitable for removing oxide layer
  • Little malfunctions; malfunctions are easy to solve through indication lights
  • Little maintenance
  • Closed setup: safe and no dust in the area
  • Easy to move and to install
  • CE approved
Frequency of controlled conveyor belt:
0,3 - 5 m1 / min.
With vacuum cleaner or magnetic support
4 pieces. of brush motors:
of 2,2 kW controlled by frequency
Minimum work piece size:
50x50 mm (MAG) / 80x80 mm (VAC)
Maximum width of the workpiece:
600 mm.
Maximum workpiece height:
170 mm.
Machine connection value:
400V, 50Hz, 32A, 16kW
2030 x 1585 x 2085 mm (L x W x H